What to send for quotation
ASTM F1554 is an anchor-bolt reference, not a complete drawing. To quote an order, we still need the rod shape, dimensions, grade, finish, accessories and evidence requirements. Send a controlled drawing or a line-by-line parts list.
Which products belong in this enquiry?
The reference addresses steel anchor bolts and rods used to connect structural supports to concrete foundations, including straight and bent forms. It is not the specification for mechanical expansion anchors. Keep an F1554 anchor-rod request separate from a wedge, sleeve or drop-in anchor enquiry.
What do Grades 36, 55 and 105 identify?
These are F1554 grade designations tied to minimum yield strength in ksi. They do not define the shape, length or coating of the finished rod. Name the grade in the order brief and leave grade selection to the approved project design.
Is Grade 55 automatically weldable?
Do not assume so. Where weldability is required, explicitly state the relevant supplementary requirement and supporting documents in the enquiry. Proposed welding belongs to a reviewed fabrication procedure; a commercial description alone is not an approval.
How should bent rods be dimensioned?
Send the approved drawing with its number and revision. Distinguish overall length, straight leg, hook or bend, threaded length, diameter and any tolerance. Identify the measuring convention and units. A photograph of an L or J rod does not resolve these dimensions.
What else changes the quotation?
List the mating nuts, washers, plates and templates separately, including quantities per rod. Define coating type and coated extent. Specify required identification, inspection documents and packing. Availability and the final inspection scope are confirmed for the actual order, not assumed from this guide.
Order information checklist
This table lists quotation inputs, not guaranteed availability or engineering acceptance criteria.
| Requirement | Information to provide |
|---|---|
| Reference | ASTM F1554, project-required edition and grade |
| Geometry | Straight / L / J or drawing-defined form; controlled dimensions |
| Thread | Thread designation, class and length at each end |
| Supplementary needs | Any specified weldability, identification or impact requirements |
| Finish and hardware | Coated extent; nuts, washers, plates and their references |
| Order documentation | Drawing revision, quantity, reports and delivery details |
Example enquiry brief
Replace each bracketed field with your approved requirements. Flag any unresolved item for review.
Drawing: [number and revision]; standard / edition: [ASTM F1554 reference]; grade: [36 / 55 / 105 as specified]; geometry and thread: [drawing requirements]; supplementary requirements: [specified items]; coating and extent: [requirements]; hardware: [references and quantities]; order: [quantity, reports, packing and destination].
Related products and guides
Technical references
Use the governing standard and approved foundation design. The manufacturer reference explains the specification; it is not evidence of FastenerBridge certification, affiliation or stock. This page does not calculate anchorage capacity.