Product and application brief
Fencing staples are selected for a fence wire or mesh and its actual supporting post or batten. The fence use alone does not define one crown, wire gauge or tool interface. Ordinary upholstery or construction staples remain a separate selection route; confirm the exact staple, support material and joint requirements.
Product forms and reference names
| Choice or field | What to identify |
|---|---|
| Barbed, divergent-point system staple | Stockade identifies selected barbed fencing staples with divergent points and tool-specific paper collation. The point term describes the selected construction; the generic image is not an installed spread-path drawing. |
| Plain versus barbed leg | Stockade lists plain and barbed batten-staple versions. Identify leg surface and fastener series explicitly; the same broad fence application does not make versions interchangeable. |
| Special hand-driven fence form | Maze lists a ring-shank hand-driven fencing construction described as a one-legged fence staple. Its geometry is a separate selected form, not evidence that every fence staple has two equal legs. |
| Loose versus collated | A loose staple and a magazine-fed strip have different presentation requirements. Exact crown, wire section, leg/point, collation and released tool-series reference must be specified together. |
Crown, legs and point geometry
Record crown shape and width measurement basis, wire diameter or cross-section, each leg length and datum, barb/ring geometry if present, and point orientation. A gauge label or leg length alone is not a complete identity. Rounded-crown and flat-crown forms must not be assumed equivalent.
Post, batten and fence-wire interface
Describe the actual receiving timber or other support, treatment and condition, fence-wire/mesh geometry and coating, and whether the project requires wire movement or a fixed connection. This is a procurement brief, not installation instructions or a universal seating-depth rule.
Keep tool and fastener series together
Stockade's FAQ treats selected collated staples as specific to its named systems. Do not transfer that identity to an unbranded staple or infer compatibility from appearance. Confirm the released tool/fastener reference and supplied collation; no generic gun fit or operating setting is claimed.
Exposure and acceptance are separate evidence
Specify required material/coating and actual exposure, including treated support and contacting fence material. A generic metallic image cannot establish zinc class, coating mass, corrosion life or holding force. ASTM lists F1667/F1667M-21a as active for driven fasteners; its public scope does not establish most collation medium/orientation requirements, and full normative dimensions and actual supplied-part conformity remain unverified.
Specification fields
| Choice or field | What to identify |
|---|---|
| Selected construction | Fence staple reference or controlled drawing/revision; post versus batten use; rounded/flat crown; plain, barbed, ring or special leg form. |
| Geometry and measurement | Crown width and its datum; wire section; each leg length and datum; barb/ring and point geometry/orientation. Confirm nominal labels against controlled dimensions. |
| Support and attached wire | Actual receiving support material, treatment and condition; wire/mesh section and coating; required movement/fixing condition and project detail. |
| Material and exposure | Required material and coating specification; environment and contact materials; requested coating/material inspection evidence. |
| Presentation and tool | Loose packaging or exact collated strip and fastener series; selected tool reference and released interface documents. No universal interchangeability. |
| Acceptance and commercial | Dimensional/material inspection, marking and documents; quantity/unit, pack/collation, destination and requested date. Production scope, availability, MOQ and timing require quotation confirmation. |
Common product questions
Can a general construction staple replace a fence staple?
Not merely because both have two legs. Match crown, wire section, point and leg form, actual support/wire joint and selected tool requirements.
Are all fencing staples barbed with equal legs?
No. Maker catalogues distinguish plain/barbed and special leg constructions. Identify the exact drawing or catalogue reference.
Does the illustration prove divergent leg movement?
No. It is a generic loose-staple appearance illustration. Actual penetration behavior and installed geometry require selected-system evidence.
Are tool compatibility and load ratings included?
No generic tool fit, withdrawal rating, corrosion lifetime or installation approval is supplied. Confirm the selected system and project requirements.
Related product choices
- General industrial two-leg staples
- Single-headed connecting nails
- Double-headed nails for selected temporary timber connections
Product references
References checked 10 October 2026 identify structures, not FastenerBridge stock, certification or brand affiliation. Final requirements follow the selected specification. No universal dimensions, load rating or tightening torque is stated.