Product and application brief
Wedge anchors are a mechanical anchoring family. Selection requires the substrate, installation conditions and the specified product's technical data, not just a diameter.
For a concrete fastening enquiry, provide the responsible engineer's required anchor system, intended application and approval requirements. Tell us whether a particular manufacturer / model is specified or alternatives may be reviewed.
Specification checklist for quotation
The table defines the information to send, not a guaranteed stock range or a substitute for an approved technical specification.
| Requirement | What to specify |
|---|---|
| Base material | Concrete condition, strength and thickness required by the design |
| Geometry | Anchor diameter, length, fixture thickness and embedment requirement |
| Connection conditions | Loads, edge distances and spacing defined by the design |
| Material / finish | Required metal and environmental protection |
| Approval | Required evaluation / certification for the specific product |
| Installation | Approved installation instructions, tools and inspection scope |
Selection and compatibility
Wedge, sleeve and drop-in anchors use different product geometries and installation systems. They should not be substituted using diameter alone.
This page does not assign a working load, torque, hole diameter or minimum edge distance. These values belong to the selected anchor's approved technical documentation and project design.
Prepare the order brief
Send a controlled drawing or complete product reference, plus quantities by size. Identify the inspection reports, packaging and shipping requirements needed for your order. If a requirement is not settled, mark it as needing confirmation rather than assuming a substitute.
Read the concrete anchors enquiry checklist before submitting your parts list.
Can you confirm load capacity from anchor diameter?
No. Capacity depends on the specific anchor, base material, embedment, spacing, edge conditions and design requirements. Provide the approved product or engineering specification.
Related products
Technical reference
Reference material illustrates the different anchor families. It is not product approval, load data or certification for a FastenerBridge order.